supply vessels – engine 4-stroke lube

 
The piston rings, cylinder liners, crankshaft bearings, and LO pumps of marine engines all have lubrication systems that keep them running smoothly. Because of ever-smaller tolerances, the lubrication oil must be kept free from particles, soot, residues and water for the engine to run smoothly and to decrease the wear on components

Challenge
If the oil is not properly cleaned and dried, then you risk having short intervals between oil changes. If contaminants are not removed then the wear on components will be higher, and the main or auxiliary engine will not function perfectly. Eventually, this can lead to reduced efficiency and higher maintenance costs and ultimately lost production resulting from engine break down. 

Benefits, installing CJC® Oil Filters

• Protect your investment
• Optimise efficiency of the supply vessel
• Increase interval between oil changes
• Reduce handling of waste oil
• Reduce risk of ME or aux repairs and wear on bearings

When you install a CJC® Oil Filter solution on your supply ship 4-stroke engine lube system, you can increase intervals between oil changes. You will experience less wear on bearings and other oil-wetted parts. Compared to conventional oil cleaning methods, waste oil will be less so you will have less sludge handling. This gives you cost savings and you avoid spending diesel to preheat the oil for conventional purifiers. 

Technically, CJC® is known for keeping oil clean, dry and with less soot residues, which is documented over many years and in several supply vessel 4-stroke engine lube installations. CJC® Oil Filter solutions are installed with many shipowners worldwide. 

When you choose CJC® Oil Filters, you ensure a long lifetime of the engine, reduce maintenance, avoid sludge, save energy and fuel, and you decrease the risk of unplanned breakdowns.  

Your solutions
For engine lube oil on supply vessels, you will need:

• CJC® Fine Filter, HDU

The CJC® System solutions fit all sizes of supply ship 4-stroke engine lube systems running on any type of fuel, and we deliver globally where required. In close co-operation with technical organizations, we help select the correct solution depending on system type and conditions in the environment.